Long-lasting protection and gloss
Solid Color Coating is a multi-layer system composed of commercial-grade epoxy primer with high-performance solid color polyaspartic topcoat and optional finish sheens (high-gloss, satin, etc.)
Schedule CallKey Benefits
- Uniform Opaque Finish
- Increased Light Reflection
- Hides Underlying Surface Texture
- Hides Substrate Imperfections
- Low-Maintenance
Typical Uses
- Garage Floors & Patios
- Airplane Hangars
- Workshops
- Manufacturing Floors
- Showrooms
- Commercial Spaces
The Process
Prep Concrete
Grind or shot-blast the concrete to open its pores, repair cracks and pits to ensure maximum adhesion for the coating.
Primer/Basecoat
An epoxy primer is applied until the concrete is
fully saturated. If additional build is required, a second intermediate primer coat may be applied.
Color and Finish/Topcoat
After curing, a solid color top coat is applied; slip-resistant aggregate may be incorporated into this coat. Additional topcoats can be added for extra protection.
Available Colors
Color Accuracy Disclaimer
We strive to display the colors of our products as accurately as possible. However, the actual colors you see will depend on your monitor, screen resolution, and device settings. We cannot guarantee that your monitor's display of any color will be completely accurate. If you have questions about a specific shade, please contact our team before purchasing.
More Information
Install & Cure Times
Install: Dependent on project size, normally one day turnaround.
Cure time: 24 hours - Walk
72 hours - Heavy machinery or equipment.
Cleaning
Thoroughly sweep floor using a broom/dry dust mop followed by damp mop using only water.
For a deeper clean, mop with water and neutral pH cleaner like Zep or OdoBan - no waxing or polishing needed.
Warning
Avoid harsh chemicals (battery acid, gas, etc.) or cleaners, aggressive scrubbing or abrasive pads to preserve sheen, as they can dull the finish.
Recoating
Periodic recoating will restore surface protection and overall appearance.