Beautiful Pops of Color
Color Chip Flooring consists of multi-colored vinyl chips broadcast into a commercial-grade primer basecoat topped with a clear, high-performance polyaspartic. Optional additional clear finish topcoats are available for customers who prefer a smoother surface.
Schedule CallKey Benefits
- Unlimited Color Combinations
- Long-lasting Slip Resistance
- Low Maintenance
- Stain Resistant
- Abrasion and Most Impact Resistant
Typical Uses
- Garage Floors & Patios
- Offices
- Locker Rooms and Public Restrooms
- Recreation Rooms
- Commercial Spaces
The Process
Prep Concrete
Grind or shot-blast the concrete to open its pores, repair cracks and pits to ensure maximum adhesion for the coating.
Primer/Basecoat
An epoxy primer is applied until the concrete is fully saturated.
Color
Premixed color chips are broadcast into the epoxy binder (basecoat) until the surface is fully covered.
Finish/Topcoat
After the binder (basecoat) cures, excess chips are removed and one or more clear polyaspartic topcoats are applied.
Available Colors
Color Accuracy Disclaimer
We strive to display the colors of our products as accurately as possible. However, the actual colors you see will depend on your monitor, screen resolution, and device settings. We cannot guarantee that your monitor's display of any color will be completely accurate. If you have questions about a specific shade, please contact our team before purchasing.
More Information
Install & Cure Times
Install: Dependent on project size, normally one day turnaround.
Cure time: 24 hours - Walk
Heavy machinery or equipment
Cleaning
Thoroughly sweep floor using a broom/dry dust mop followed by damp mop using only water.
For a deeper clean, mop with water and neutral pH cleaner like Zep or OdoBan - no waxing or polishing needed.
Warning
Avoid harsh chemicals (battery acid, gas, etc.) or cleaners, aggressive scrubbing or abrasive pads to preserve sheen, as they can dull the finish.
Recoating
Periodic recoating will restore surface protection and overall appearance.